Menunggu...

Mazda RX7 Spirit R (FD3S) Handling and Configs | Optimized for Steering Wheel Use

34

Disclaimer: I am using an older version of the game (yes, I also own a legal copy, but the mods arent working with it!) and some outdated mods. To access the latest versions, you may need to pay for them. Ill provide a link where applicable.

This custom configurations for the Mazda RX-7 FD3S has been designed to provide an authentic and relatively realistic driving experience, tailored to the iconic rotary-engine sports car.

I havent able to drive this car or any car similar to this. I will not be able to confidently say I replicated it but I am happy with the result! If you have any comments to improve, please let me know. Thank you so much! (Especially to the guys to developed the mods I used!)

Key Changes & Features:


  • Suspension Tuning: Optimized suspension tuning with pretty realistic spring force, compression, and rebound damping to reflect the RX-7s stock setup. Anti-roll bars calibrated for realistic(ish) cornering stability while maintaining comfort. Suspension travel limits adjusted for accurate ride height and handling dynamics.

  • Drivetrain: Accurate gear ratios and clutch response (using the Manual Transmission mod) for smoother shifts and realistic acceleration. DrivingForce adjusted to match the 294 Nm peak torque output of the 13B rotary engine. Engine braking calibrated to simulate the lightweight and high-revving characteristics of the rotary engine.

  • Steering and Traction: Fine-tuned steering response and max steering angle for precise control. Traction settings optimized for varying surface grip and loss, enhancing cornering and launch performance.

  • Adjusted Car Dial: RPM gauge of the car model is adjusted to fit the actual RPMs.
  • Optimized for Steering Wheel Control

  • Manual Transmission Configuration: The config activated the ABS and LSD. As well as few finetuning.


Requirements:
I consider the following mods essential because they were enabled when I created and fine-tuned these configurations:
  • Mazda RX7 Spirit R (FD3S) Car Mod (https://www.gta5-mods.com/vehicles/2002-mazda-rx-7-spirit-r-type-a-series-iii-fd3s)
  • OpenIV (https://www.gta5-mods.com/tools/openiv)
  • Manual Transmission (w/ Handling Replacement) (https://www.gta5-mods.com/scripts/manual-transmission-ikt & https://www.gta5-mods.com/tools/handling-replacement-library)
  • Custom Gear Ratio (https://www.gta5-mods.com/scripts/custom-gear-ratios)
  • InversePower (https://www.gta5-mods.com/scripts/inversepower)
  • Custom Torque Map (https://www.gta5-mods.com/scripts/custom-torque-map)
  • TurboFix (https://www.gta5-mods.com/scripts/turbofix-2)
  • DashHook (https://www.gta5-mods.com/tools/dashhook)
  • Dial Accuracy Fix (https://www.gta5-mods.com/scripts/dial-accuracy-fix)
  • True Realistic Driving V (https://www.gta5-mods.com/scripts/true-realistic-driving-v-realistic-mass-v0-1-beta)


Installation Instructions:

  1. DOWNLOAD and INSTALL the required mods above.
  2. Remove existing autoload configurations for the mods above (like Custom Gear Ratio, etc.)

  3. Handling Installation:
    1. Open OpenIV and enable Edit Mode.
    2. Navigate to: mods > update > x64 > dlcpacks > fd > dlc.rpf > common > data (if you didn't use the mods folder, just start at update folder)
    3. Drag and drop the handling.meta file from the Handling folder (included in this archive) into the directory.


  4. Gear Ratio Configuration:
    1. Copy the .xml file from the Gear Ratio folder (included in this archive).
    2. Navigate to your GTA V folder then CustomGearRatios > Configs
    3. Paste the .xml file into the Configs folder.


  5. Dial Accuracy Configuration:
    1. Open the .ini file from the Dial Accuracy folder (included in this archive) and copy all the content.
    2. Navigate to your GTA V folder then DialAccuracyFix
    3. Open the settings.ini and paste the copied content at the bottom of the .ini file.
    4. Save the changes.


  6. Torque Power Curve Configuration:
    1. Copy the .ini file from the Torque Map folder (included in this archive).
    2. Navigate to your GTA V folder then CustomTorqueMap > Configs
    3. Paste the .ini file into the Configs folder.



THANK YOU!
A huge thanks to othe people who developed these tools and mods to achieve this. Special mentions to: [YCA]Vsoreny(https://www.gta5-mods.com/users/Vsoreny), ikt(https://www.gta5-mods.com/users/ikt), any333(https://www.gta5-mods.com/users/any333), GooD-NTS(https://www.gta5-mods.com/users/GooDPUTPERCENTSIGNHERE2DNTS), and to the whole community.

You can get the latest versions of the outdated mods by ikt here https://www.patreon.com/ikt

You can also get Streiter V12 sound mod for this car here: https://www.gta5-mods.com/vehicles/mazda-rx-7-13b-rew-engine-sound-add-on-fivem-sound-streiterPUTUNDERSCOREHEREv12
Show Full Description

Pertama dimuat naik: 4 hours ago
Tarikh Kemaskini: 4 hours ago
Last Downloaded: 3 minit yang lalu

All Versions

  (current)

34 muat turun , 3 KB
4 hours ago

1 Komen